Zebra Zmyg 40° 1W 2700K
Downlight/Spotlight/Floodlight |
|
| Outer diameter | 30 mm |
| Protection class | III |
| Reflector | None |
| Lamp holder/socket | None |
| Housing/body color | White |
| Surface protection | Powder-coated |
| Voltage type | DC |
| With motion sensor | No |
| Control gear | LED control gear constant voltage |
| Color rendering index (CRI/Ra) | 80-89 |
| Installation diameter | 25 mm |
| With light sensor | No |
| Suitable for pendant suspension | No |
| Height/depth | 25 mm |
| Housing/body material | Aluminium |
| Light source | LED not exchangeable |
| Light output | Direct |
| Diffuser material | None |
| Light distribution | Symmetric |
| Rated voltage from/to | 24 to 24 V |
| Degree of protection (IP) | IP44 |
| With light source | Yes |
|---|---|
| Covering with insulation | Yes |
| Suitable for wall mounting | No |
| Suitable for built-in installation | Yes |
| Control gear included | No |
| Suitable for surface mounting | No |
| Beam angle | Wide beam 40-80° |
| Brushed surface | No |
| Color temperature | 2700 to 2700 K |
| Rated luminous flux according to IEC 62722-2-1 | 60 lm |
| Adjustability | Not adjustable |
| Suitable for pole/floor mounting | No |
| Suitable for truss mounting | No |
| Light color | White |
| Suitable for track mounting | No |
| Suitable for clamp mounting | No |
| Luminous flux | 60 to 60 lm |
| Type of wiring | Suitable for through-wiring |
| Nominal lifetime L70/B10 at 25 °C | 50000 h |
| Color consistency (McAdam ellipse) | SDCM3 |
| Dimming depending on control gear | Yes |
| Suitable for low voltage system | No |
| Light diffuser | Focus lens |
| Energy efficiency class of built-in lamps | A++, A+, A (LED) |
| Suitable for ceiling mounting | No |
| Installation height/depth | 25 mm |
